Optimization of Oleic Acid Esterification with Butanol, Hexanol, and Octanol: Effect of Catalyst, Molar Ratio, and Temperature

Carlos Eduardo  Francisquini; Paulo Roberto de Oliveira

doi:10.18540/jcecvl11iss1pp22009

Authors

Carlos Eduardo Francisquini Universidade Tecnológica Federal do Paraná, Campus Curitiba, Brazil https://orcid.org/0009-0009-4316-5036
Paulo Roberto de Oliveira Universidade Tecnológica Federal do Paraná, Campus Curitiba, Brazil https://orcid.org/0000-0001-8355-3716

DOI:

https://doi.org/10.18540/jcecvl11iss1pp22009

Keywords:

Esterification. Oleic Acid. Octyl Oleate. Hexyl Oleate. Octanol. Hexanol.

Abstract

Esterification reactions between carboxylic acids and alcohols, catalyzed by acids or bases, yield esters and water as a byproduct. These reactions hold significant industrial relevance, as esters are widely used in the production of lubricants, plasticizers, coatings, solvents, flavors, pharmaceuticals, cosmetics and biofuels. Environmental concerns regarding the spillage or improper disposal of mineral oils have heightened the demand for renewable and environmentally benign alternatives such as biolubricants, which are derivated from vegetable oils. This study investigates the influence of the oleic acid to butanol molar ratio, reaction temperature, time, and catalyst type in the production of butyl oleate and assess the best conditions for the production of methyl, ethyl, hexyl and octyl esters. Molar ratios of 1:3, 1:6 and 1:9 (oleic acid to butanol) were tested at reaction temperatures of 60, 80, 100 and 120 °C. Catalysts evaluated included H₂SO₄, AlCl₃, Fe₂(SO₄)₃ and APTS (p-toluenesulfonic acid), each at 1 wt % relative to oleic acid. Optimal conditions for producing butyl oleate were identified as a molar ratio of 1:6, a temperature of 80 °C, and 1 wt % H₂SO₄, affording a 92.3 ± 0.2% yield after 6 h. Hexyl and octyl oleates were obtained in yields of 92.8 ± 0.1% and 94.8 ± 0.1%, respectively, under conditions of 2.5 wt % H₂SO₄, 1:3 molar ratio, 80 °C, and 2 h reaction time. Determining the optimal conditions for these alkyl oleates is important for future studies on their potential applications as biolubricants.

Downloads

Download data is not yet available.

References

AOCS. (1998). AOCS Official Method Cd 3d-63: Acid Value. In *Official Methods and Recommended Practices of the American Oil Chemists’ Society* (5th ed.). Champaign, IL: AOCS Press.

Ahmad, U., Naqvi, S. R., Ali, I., Saleem, F., Mehran, M. T., Sikandar, U., & Juchelková, D. (2022). Biolubricant production from castor oil using iron oxide nanoparticles as an additive: Experimental, modelling and tribological assessment. Fuel, 324, 124565. doi: https://doi.org/10.1016/j.fuel.2022.124565

Beula, C., & Sai, P. S. T. (2014). Kinetics of esterification of acetic acid and ethanol with a homogeneous acid catalyst. Indian Chemical Engineer, 57(2), 177–196.

doi: https://doi.org/10.1080/00194506.2014.975761

De Oliveira, V. F., Parente Jr., E. J. S., Manrique-Rueda, E. D., Calvalcante Jr., C. L., & Luna, F. M. T. (2020). Fatty acid alkyl esters obtained from babassu oil using C1–C8 alcohols and process integration into a typical biodiesel plant. Chemical Engineering Research and Design, 160, 224–232. doi: https://doi.org/10.1016/j.cherd.2020.05.028

Dufaure, C., Thamrin, U., & Mouloungui, Z. (1999). Comparison of the thermal behaviour of some fatty esters and related ethers by TGA–DTA analysis. Thermochimica Acta, 338(1–2), 77–83. doi: https://doi.org/10.1016/S0040-6031(99)00177-X

Encinar, J. M., Nogales-Delgado, S., Sánchez, N., & González, J. F. (2020). Biolubricants from rapeseed and castor oil transesterification by using titanium isopropoxide as a catalyst: Production and characterization. Catalysts, 10(4), 366. doi: https://doi.org/10.3390/catal10040366

Farag, H. A., El-Maghraby, A., & Taha, N. A. (2011). Optimization of factors affecting esterification of mixed oil with high percentage of free fatty acid. Fuel Processing Technology, 92, 507–510. doi: https://doi.org/10.1016/j.fuproc.2010.11.004

Gryglewicz, S., Stankiewicz, M., Oko, F. A., & Surawska, I. (2006). Esters of dicarboxylic acids as additives for lubricating oils. Tribology International, 39(6), 560–564. doi: https://doi.org/10.1016/j.triboint.2005.06.001

Kamalakar, K., Sai Manoj, G. N. V. T., Prasad, R. B. N., & Karuna, M. S. L. (2015). Influence of structural modification on lubricant properties of sal fat-based lubricant base stocks. Industrial Crops and Products, 76, 456–466. doi: https://doi.org/10.1016/j.indcrop.2015.07.050

Marchetti, J. M., & Errazu, A. F. (2008). Comparison of different heterogeneous catalysts and different alcohols for the esterification reaction of oleic acid. Fuel, 87(15–16), 3477–3480. doi: https://doi.org/10.1016/j.fuel.2008.05.011

Monteiro, R. R. C., Murcia, A. B., Martin, J. R., Vieira, R. S., & Lafuente, R. F. (2023). Biocatalytic production of biolubricants: Strategies, problems and future trends. Biotechnology Advances, 68, 108215. doi: https://doi.org/10.1016/j.biotechadv.2023.108215

Máximo, F., Bastida, J., Montiel, C., Gómez, M., Murcia, M. D., Barqueros, C., & Ortega-Requena, S. (2024). Branched saturated esters and diesters: Sustainable synthesis of excellent biolubricants. Catalysis Today, 429, 114509. doi: https://doi.org/10.1016/j.cattod.2024.114509

Narayanasarma, S., & Kuzhiveli, B. T. (2021). Evaluation of lubricant properties of polyolester oil blended with sesame oil: An experimental investigation. Journal of Cleaner Production, 281, 125347. doi: https://doi.org/10.1016/j.jclepro.2020.125347

Rudnick, L. R. (2020). Synthetics, mineral oils and bio-based lubricants: Chemistry and technology (2nd ed.). CRC Press. doi: https://doi.org/10.1201/9781315158150

Sripada, P. K., Sharma, R. V., & Dalai, A. K. (2013). Comparative study of tribological properties of trimethylolpropane-based biolubricants derived from methyl oleate and canola biodiesel. Industrial Crops and Products, 50, 95–103. doi: https://doi.org/10.1016/j.indcrop.2013.07.018

Xie, Q., Zhu, H., Xu, P., Xing, K., Yu, S., Liang, X., Ji, W., Nie, Y., & Ji, J. (2022). Transesterification of methyl oleate for sustainable production of biolubricant: Process optimization and kinetic study. Industrial Crops and Products, 182, 114879. doi: https://doi.org/10.1016/j.indcrop.2022.114879

Zhang, H., Ding, J., Qiu, Y., & Zhao, Z. (2012). Kinetics of esterification of acidified oil with different alcohols by a cation ion-exchange resin/polyethersulfone hybrid catalytic membrane. Bioresource Technology, 112, 28–33. doi: https://doi.org/10.1016/j.biortech.2012.02.104