DEVELOPMENT OF AN ELECTROSTATIC DEVICE FOR A HYDRAULIC BACKPACK SPRAYER - DOI: 10.13083/1414-3984.v22n01a01
DOI:
https://doi.org/10.13083/reveng.v22i1.290Keywords:
pulverização eletrostática, agrotóxicos, vazão de liquidoAbstract
Electrostatic spraying consists of charging droplets with electric charge, creating an electric field can increase the attraction of droplets by the plants. The objective of this study was to develop an electrostatic device for a hydraulic backpack sprayer, using a high voltage and low cost source. An automotive ignition coil was connected to an electronic circuit powered by a 12 volt battery. The high voltage supply was installed on the rear of the sprayer and connected to a indirect electrification device, which was constructed of copper, measuring 0.10 m in diameter and 0.03 m thick. Flow measurement in the spray nozzle was performed using a Faraday cage, connected to a micro-ammeter. The source provided nine different working conditions, with adjustable voltage between 4.2 and 12.8 kV, which allowed for obtaining charge/mass ratios of 0.3 mC kg-1 to 4.1 mC kg-1, working with a flow rate of 0.6, 1.5 and 1.9 L min-1.Downloads
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
The author(s) authorize(s) the publication of the text in the journal;
The author(s) ensure(s) that the contribution is original and unpublished and that it is not in the process of evaluation by another journal;
The journal is not responsible for the views, ideas and concepts presented in articles, and these are the sole responsibility of the author(s);
The publishers reserve the right to make textual adjustments and adapt texts to meet with publication standards.
From submission, the author is fully conceding the paper's patrimonial rights to the publication, but retaining the owner of its moral rights (authorship and paper's identification) according to Creative Commons Attribution-Noncommercial.