Study of surface topography in milling of 6351 T6 aluminum alloy

Authors

  • Eliene Oliveira Lucas Universidade Federal de Viçosa
  • Rafael Borges Mundin Universidade Federal de Viçosa
  • Eder Silva Costa Universidade Federal de Viçosa
  • Antonio Marcos de Oliveira Siqueira Universidade Federal de Viçosa https://orcid.org/0000-0001-9334-0394

DOI:

https://doi.org/10.18540/jcecvl8iss3pp14027-01e

Keywords:

Topography surface; Post-coat treatment; Milling of aluminum alloy.

Abstract

In milling the surface texture is generated by the superposition of curved surfaces resulting from the passage of an edge is removed by the subsequent which in turn makes a waviness. The phase difference between the waves is used as indicative of the presence of vibrations that mainly result in a poor surface finish. Topography parameters (roughness and waviness) represent a relative measure of the process stability. This study’s objective is to describe the surface topography, from systematic trials in milling of aluminum alloy 6351T6 with solid carbide end mills different only with respect to surface finish. The results were based on acquired vertical roughness parameters (Ra, Rq, Rz, and Rt) to different cutting conditions.

Downloads

Download data is not yet available.

Published

2022-03-18

How to Cite

Lucas, E. O., Mundin, R. B., Costa, E. S., & Siqueira, A. M. de O. . (2022). Study of surface topography in milling of 6351 T6 aluminum alloy. The Journal of Engineering and Exact Sciences, 8(3), 14027–01e. https://doi.org/10.18540/jcecvl8iss3pp14027-01e

Issue

Section

General Articles