Vol. 10 No. 1 (2024)

View Vol. 10 No. 1 (2024)
Published: 2024-01-03

General Articles

  • Predictive Control for PV- Water Pumping System based of Interconnected High Gain Observer

    Lamouchi Zakaria, Allal Abderrahim, Abderrahmane Khechekhouche, Antonio Marcos de Oliveira Siqueira, Júlio Cesar Costa Campos, Kheireddine Lamamra
    18214
    DOI: https://doi.org/10.18540/jcecvl10iss1pp18214

  • Siphon-type hydroelectric plants: application for power generation in a low head dam in southern Brazil

    Janaina Terhorst Pizutti, Carlos Henrique Pereira Assunção Galdino, Fernando Setembrino Cruz Meirelles, Alexandre Beluco
    16392
    DOI: https://doi.org/10.18540/jcecvl10iss1pp16392

  • Evaluation of surface roughness in face milling of austempered ductile iron (ADI)

    Pedro Paulo Rosa de Paula , Lucas Benini, José Mauro Moraes Junior, Sérgio Souto Maior Tavares
    17790
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17790

  • A mathematical analysis to the approximate weak solution of the Smagorinsky Model for different flow regimes

    Rômulo Damasclin Chaves dos Santos, Jorge Henrique de Oliveira Sales, Alice Rosa da Silva
    17579
    DOI: https://doi.org/10.18540/jcecvl10iss01pp17579

  • Comparative study on perovskite solar cells using P_ZnO, Al_ZnO and In_ZnO as ETMs by SCAPS-1D

    Meriem Kerara, Abdelkrim Naas, Khalid Reggab
    17387
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17387

  • Use of marble waste for application as a load of PLA filaments for application in 3D printing

    Vicente Castilho Rozado Siqueira, Mariana Barbosa Mendes de Sousa, Julianna dos Santos da Silva Ferreira, Eric Ribeiro da Cunha, João Victor Nicolini, Simone Pereira Taguchi Borges
    17140
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17140

  • Energy efficiency of a house in Mediterranean region: insulation and glazing impact

    Salaheddine Jaouaf, Bourassia Bensaad, Abdelhakim Dorbane
    17038
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17038

  • GATE code in the image generation and dose calculation of a conventional tomographic system

    Felix Mas Milian, Paulo Eduardo Ambrosio, Susana Marrero Iglesias, Marcelo Ossamu Honda, Allan Medeiros Martins, Dany Sanchez Dominguez
    17803
    DOI: https://doi.org/10.18540/jcecvl10iss01pp17803

  • Use of SPT tests for the analysis of load capacity of foundations in deterministic and probabilistic terms

    Jorge Felipe Garcez Fonseca, George Fernandes Azevedo
    17712
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17712

  • Analyzing the potency of Viscosity Modifying Agents on the Characteristics and Static Segregation of Fresh and Hardened Fluid Concrete

    Faiza M’hamdi, Othmane Boukendakdji, Karim Ezziane, Taha-Hocine Douara
    17416
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17416

  • Analysis of the influence of defects on the mechanical properties of polymeric materials used in 3D printed parts

    Reinaldo Lube Filho, Antonio Henrique Monteiro Fonseca Thomé da Silva, Vilson Berilli Mendes, Paulo Arthur Lima de Deus
    17193
    DOI: https://doi.org/10.18540/jcecvl9iss10pp17193

  • Energy Utilization from Gases Generated by Charcoal Burning

    Vitor Diego D. Barbosa, Carlos Daniel S. de Oliveira, Tiago Mendes
    17126
    DOI: https://doi.org/10.18540/jcecvl10iss1pp17126

  • An investigation of the effect of high temperature on the strength compression and ultrasonic pulse velocity of self-compacting concrete

    Hadji Ben Salah, Mostefa Hani
    16818
    DOI: https://doi.org/10.18540/jcecvl10iss1pp16818