Design of double stage springs for Baja SAE type vehicles

Authors

  • Pedro Márcio do Carmo Silva Universidade Federal de São João del-Rei, Brazil
  • Camila Tavares Ribeiro Universidade Federal de São João del-Rei, Brazil
  • Marcus Vinicius Sousa Melo Universidade Federal de São João del-Rei, Brazil
  • José Antônio da Silva Universidade Federal de São João del-Rei, Brazil https://orcid.org/0000-0003-4813-1029
  • Júlio Cesar Costa Campos Universidade Federal de Viçosa, Brazil https://orcid.org/0000-0002-9488-8164
  • Antonio Marcos de Oliveira Siqueira Universidade Federal de Viçosa, Brazil https://orcid.org/0000-0001-9334-0394
  • Flavio Neves Teixeira Universidade Federal de São João del-Rei, Brazil https://orcid.org/0000-0003-2341-1497
  • Luiz Gustavo Monteiro Guimarães Universidade Federal de São João del-Rei, Brazil

DOI:

https://doi.org/10.18540/jcecvl9iss8pp16665-01e

Keywords:

Springs, Suspension, Double Stage, BAJA SAE.

Abstract

Aiming to improve the parameters which influence the performance and ergonomics of the Komiketo Baja UFSJ prototype and to optimize its results during the Baja SAE competitions, a study proposed a new methodology to substitute linear springs for double stage spring. Springs are components with high elastic deformation’s ability that compound the automotive suspension system and they influence the vehicle dynamic performance. The experimentation consists in using the Microsoft Excel software and making a simulation of a model going through an irregular trail presenting high and low oscillation frequencies of the suspension, using MSC Adams Car® software. The test was divided in two stages, one for the operation of the vehicle with linear springs and the other for non-linear springs (double-stage springs). Then, some graphics were presented with the necessary data, aiming to compare the behavior of both suspension conditions, where the vertical acceleration was considered as a comparative criterion. The results were promising presenting improvements as the ergonomics parameters, regarding the linear springs previously used in the vehicle.

Downloads

Download data is not yet available.

Downloads

Published

2023-09-25

How to Cite

Silva , P. M. do C., Ribeiro , C. T., Melo , M. V. S., Silva, J. A. da, Campos, J. C. C., Siqueira, A. M. de O., Teixeira , F. N., & Guimarães, L. G. M. (2023). Design of double stage springs for Baja SAE type vehicles. The Journal of Engineering and Exact Sciences, 9(8), 16665–01e. https://doi.org/10.18540/jcecvl9iss8pp16665-01e

Issue

Section

General Articles

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 > >>