Vol. 6 No. 5 (2020)

View Vol. 6 No. 5 (2020)

The_Journal_of_Engineering_and_Exact_Science_-_capa011.png

Published: 2020-12-12

General Articles

  • Guide for authors: jCEC Template

    Ivan Carlos Franco, Antonio Marcos de Oliveira Siqueira
    0001-0005ed
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0001-0005ed

  • Arduino based platform for process control learning

    Bruna Couto Molinar Henrique, Leonardo Couto Molinar Henrique, Humberto Molinar Henrique
    0585-0593
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0585-0593

  • Vulcanization with Natural Products: An analysis through of Molecular Modeling

    Helson Moreira da Costa, Valéria Dutra Ramos
    0594-0606
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0594-0606

  • Effect of preparation method in the properties of iron oxide catalysts for fenton reaction

    Fabiana Maria Barbosa, Andre Rosa Martins
    0607-0616
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0607-0616

  • 3D Bioprinting: a review of materials, processes and bioink properties

    Anna Beatriz Fontes, Raphael Fortes Marcomini
    0617-0639
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0617-0639

  • Application of the environmental management system in minimizing the environmental impacts generated by a poultry slaughter agroindustry

    Adriana Biasi Vanin, Gabriel Marquez
    0640-0646
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0640-0646

  • Determination of ammoniacal nitrogen in samples of food, soil, fertilizers and water based on the reaction with formaldehyde

    Juracir Silva Santos, César Reis, Efraim Lázaro Reis, Raildo Mota de Jesus, Luís Gustavo Teixeira dos Reis, Alexsandro Antônio Matias
    0647-0654
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0647-0654

  • Obtaining residual curves maps for homogeneous azeotropic ternary systems: a comparative study

    Josemar Pereira da Silva, Márcio Ribeiro Vianna Neto, Gustavo Matheus Almeida, Eder Domingos de Oliveira
    0655-0665
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0655-0665

  • Productivity enhancement of stepped solar still integrated MEMS light sensors for solar tracker

    Ali. F. Muftah
    0666-0667
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0666-0667

  • Three-dimensional models applied to offshore oil rigs engineering: Drilling steps and environmental risks

    Brian Siqueira Zampirolli, Rodson de Abreu Marques
    0668-0681
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0668-0681

  • Synthesis, characterization and evaluation of the antimicrobial power of the Ag/TiO2 nanocomposite

    Maria Elisa Berriel de Sousa, Paula de Freitas Rosa Remiro, Andre Bernardo, Mônica Lopes Aguiar
    0682-0687
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0682-0687

  • Obtaining and characterization of high density polyethylene composite (HDPE) with coconut fiber

    Carla Reis de Araujo, Michel Serra Sampaio
    0688-0694
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0688-0694

  • Risks of industry 4.0: a theoretical framework from sustainability views

    Ramon Soltovski, Thales Volpe Rodrigues, Luis Mauricio Martins de Resende, Joseane Pontes, Rui Tadashi Yoshino
    0695-0703
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0695-0703

  • Acetic acid adsorption in activated carbon for adsorption teaching

    Bruno José Arcanjo Gonçalves , Kátia Cecília de Souza Figueiredo
    0704-0708
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0704-0708

  • Thermal stability changing caused by chromium (iii) in the carbonated magnesium-aluminum hydrotalcite

    Nayara Bach Franco de Aquino, Daniel Branco de Morais, Andriélli Corrêa de Aquino, Graciele Vieira Barbosa, Alberto Adriano Cavalheiro
    0709-0716
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0709-0716

  • Study of residual stress and distortions of parts produced by FDM printing using the finite element method

    Alexandre Tácito Malavolta, Álvaro de Godoy Müller
    0717-0722
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0717-0722

  • Numerical simulation of centrifugal fans performance with volute type change: normal and with indentation

    Gabriela Pereira Toledo, Henrique Márcio Pereira Rosa
    0723-0731
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0723-0731

  • Development of a software for sizing tube type foundations for transmission line towers

    Renata de Oliveira Marinho, Manoel Denis Costa Ferreira, João Marcos Azevedo de Oliveira, Gleidson Leite da Silva
    0732-0739
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0732-0739

  • Energy reuse of sewage treatment plant sludge

    Ana Flávia Fagundes Moura, Antonio Marcos de Oliveira Siqueira, Isabella Cota Leite , Marcela Cota Martins , Francine Duarte Castro, Jaqueline Lacerda da Silva
    0740-0747
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0740-0747

  • Study of the kinetics of cationic flotation of iron ore waste

    Tiago Eugênio Lopes, Samuel de Oliveira Freitas, Nádia Fernanda de Souza, Andressa Rafaela Alves Pinto, Arlete Barbosa Reis
    0748-0751
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0748-0751

  • Simulation of heat transfer processes applied to the food industry with focus on meat products

    Isadora Vitoria Coelho Torres , Tainara Camila de Souza, Antonio Marcos de Oliveira Siqueira
    0752-0764
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0752-0764

  • Transiente diffusion equation: an alternative finite difference approach

    Marcelo Franco de Oliveira
    0765-0769
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0765-0769

  • Computation of residue curves maps using a simple finite difference method

    Josemar Pereira da Silva, Márcio Ribeiro Vianna Neto, Gustavo Matheus Almeida, Éder Domingues de Oliveira
    0770-0776
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0770-0776

  • Analysis of the calculation of the thermal load of a cooling chamber of bovine carcasses with a capacity of 42 tons

    Marcos Duran Pereira, Aline Silva de Oliveira
    0777-0782
    DOI: https://doi.org/10.18540/jcecvl6iss5pp0777-0782