Flame temperature analysis in the oxycut process using acetylene gas: a numerical study

Auteurs

  • Gustavo L. S. Silva Federal University of Viçosa, Department of Production and Mechanical Engineering https://orcid.org/0000-0002-3130-6307
  • Júlio Cesar Costa Campos Federal University of Viçosa, Department of Production and Mechanical Engineering, : Federal University of São João del-Rei, Graduate Program in Energy Engineering https://orcid.org/0000-0002-9488-8164
  • Charles Luiz da Silva Federal University of Viçosa, Department of Production and Mechanical Engineering https://orcid.org/0000-0003-1558-0485
  • Igor R. R. Carlos Federal University of São João del-Rei, Graduate Program in Energy Engineering https://orcid.org/0000-0002-6724-753X
  • Antonio Marcos de Oliveira Siqueira Federal University of Viçosa, Department of Chemistry https://orcid.org/0000-0001-9334-0394
  • Rogério F. Brito Federal University of Itajubá, Department of Mechanics https://orcid.org/0000-0002-6833-7801
  • Luciano José Minette Federal University of Viçosa, Department of Production and Mechanical Engineering,

DOI :

https://doi.org/10.18540/jcecvl6iss4pp0555-0563

Mots-clés :

Flame Model Oxyfuel Flame Temperature Partially Premixed Combustion

Résumé

To cut metals, the oxycut process uses a preheating flame, usually composed of oxygen and a combustible gas, in addition to a flame-independent jet of oxygen. In the present work, the partially premixed combustion model of a finite volume-based software was applied to analyze the flame temperature in a cutting tip of acetylene. At the torch inlet boundary, the flow rates of oxygen and acetylene were adjusted to sweep a wide range of fuel-oxygen ratio. The results pointed a peak surrounding the stoichiometric ratio, at 3106 °C for the literature and 2650.93 °C for the numerical model, contrasting a deviation of 14.65%. The maximum temperature occurs at 52.38% of oxygen volume for the literature and 50.03% for the model, a difference of 2.35 percentage points only. It is concluded that the results of the numerical approach attained the ends of the research.

Téléchargements

Les données relatives au téléchargement ne sont pas encore disponibles.

Téléchargements

Publiée

2020-10-20

Comment citer

Silva, G. L. S. ., Campos, J. C. C., Silva, C. L. da, Carlos, I. R. R. ., Siqueira, A. M. de O., Brito, R. F. ., & Minette, L. J. (2020). Flame temperature analysis in the oxycut process using acetylene gas: a numerical study. The Journal of Engineering and Exact Sciences, 6(4), 0555–0563. https://doi.org/10.18540/jcecvl6iss4pp0555-0563

Numéro

Rubrique

General Articles

Articles les plus lus par le même auteur ou la même autrice

1 2 3 4 5 6 7 8 9 > >>