Dynamic analysis of a translating five-bar linkage mechanism

Authors

  • Arinola Bola Ajayi Mechanical Engineering Dept., Faculty of Engineering, University of Lagos. Lagos. Nigeria.
  • Adeshola Oluremi Openibo Mechanical Engineering Dept., Faculty of Engineering, Lagos State university, LASU, Epe Campus, Lagos State. Nigeria https://orcid.org/0000-0002-2779-3958
  • Gbeminiyi Musibau Sobamowo Mechanical Engineering Dept., Faculty of Engineering, University of Lagos. Lagos. Nigeria
  • Antonio Marcos de Oliveira Siqueira Federal University of Viçosa, Brazil https://orcid.org/0000-0001-9334-0394

DOI:

https://doi.org/10.18540/jcecvl8iss3pp15041-01i

Keywords:

Dynamic analysis. Five – bar linkage mechanism. Pin joint moments. Pin joint reaction. Translating velocity.

Abstract

In this paper, the dynamic analysis of a translating five-bar linkage mechanism is presented. The dynamic model of the mechanism is developed with the applied force to the crank arm resolved into the two principal planes, that is, x- and y- directions and the resulting reaction forces and moments at the pin joints determined at various translating acceleration of 0, 10, 20, 30 and 40 m/s2 in the direction as well as in the opposite direction of the crank rotation. It was observed that the horizontal reaction forces at the pin joints were decreasing as the translating acceleration increases in the direction of crank rotation while it increases when the acceleration increases in the opposite direction to the crank rotation. It was also observed that the pin joint moments at point A decreases as the translation velocities increases in the crank arm rotation direction while it increases as the acceleration increases in the opposite direction. The converse is the case for pin joint B, while there were no significant differences for pin joint moments at pin joints C and D in all the considered acceleration in both directions. Also, the vertical reaction forces at the pin joints did not change in magnitude as the magnitude and directions of the acceleration were altered. The analysis brings to the fore the importance of the consideration of translating acceleration in the design, development and utilization of five – bar linkage to avoid failure at any of the joints.

Downloads

Download data is not yet available.

Downloads

Published

2022-12-06

How to Cite

Ajayi, A. B., Openibo, A. O., Sobamowo, G. M., & Siqueira, A. M. de O. (2022). Dynamic analysis of a translating five-bar linkage mechanism. The Journal of Engineering and Exact Sciences, 8(3), 15041–01i. https://doi.org/10.18540/jcecvl8iss3pp15041-01i

Issue

Section

Special Topics

Most read articles by the same author(s)

<< < 3 4 5 6 7 8 9 > >>